Industrial electrical work is the installation, maintenance and repair of electrical systems in factories, workshops, warehouses, plants and other industrial sites. It deals with higher loads, three-phase power, heavy machinery and control systems, so it needs electricians with industrial experience and a strong focus on safety and uptime.
If you run or manage an industrial site in WA, here’s what industrial electrical work covers, how it differs from commercial and residential work, and what your maintenance and safety obligations look like.
What is industrial electrical work?
Industrial electrical work covers the power, control and lighting systems that keep an industrial operation running. Compared to a home or shop, an industrial site usually has:
- Three-phase power at higher voltages and currents
- Large motors and machinery such as pumps, compressors, conveyors and fans
- Control systems including motor control centres (MCCs), variable speed drives (VSDs) and programmable logic controllers (PLCs)
- Heavy-duty cabling run through cable trays, conduit and ladder systems, often exposed to heat, dust, moisture or vibration
- Higher consequences when something fails, from lost production to serious safety risks
That’s why an electrician who is great at house wiring isn’t automatically the right fit for a factory floor. Industrial work needs experience with the equipment, the environment and the way production sites operate.
What does an industrial electrician do?
An industrial electrician installs, maintains and repairs the electrical equipment that industrial sites rely on. On a typical day that might include:
- Wiring and connecting new machinery, motors and production equipment
- Installing and upgrading switchboards and motor control panels
- Fault finding when a machine or circuit stops working
- Carrying out planned maintenance and inspections
- Testing RCDs, emergency lighting and portable equipment
- Reading electrical drawings and working alongside mechanical fitters, engineers and site managers
Industrial electricians often work closely with mechanical trades, because many faults sit where the electrical and mechanical sides of a machine meet. Being able to isolate equipment safely, diagnose the real cause and get it running again quickly is a big part of the job.
Industrial vs commercial vs residential electrical work
| Residential | Commercial | Industrial | |
|---|---|---|---|
| Typical sites | Homes, units | Offices, shops, cafes, medical centres | Factories, workshops, warehouses, plants |
| Power supply | Mostly single-phase | Single and three-phase | Three-phase, higher capacity |
| Typical loads | Lights, power points, appliances, air con | Lighting, HVAC, data, kitchen equipment | Motors, machinery, compressors, production lines |
| Main priority | Safety and comfort | Safety, presentation, minimal disruption to trade | Safety, uptime and reliability of production |
| Environment | Clean and dry | Mostly clean and dry | Often dusty, wet, hot or high-vibration |
There’s some overlap, and many electricians work across all three. If your business is more office or retail than factory, see our commercial electrical services.
Common types of industrial electrical work
Industrial electrical installation
New installations range from fitting out a new facility to adding a single machine. Typical jobs include:
- Power and lighting for new factories, sheds and warehouses
- New circuits and supply for machinery and production lines
- Main and distribution switchboards
- Motor control and VSD installation
- Three-phase outlets and dedicated equipment circuits
- High bay LED lighting and emergency lighting
Maintenance and repairs
Once the system is running, the focus shifts to keeping it running. This covers fault finding, breakdown repairs, replacing worn components and planned maintenance to catch problems before they stop production.
Upgrades
Older sites often outgrow their electrical systems. Common upgrades include switchboard replacements, increasing supply capacity for new equipment, upgrading lighting to LED and replacing outdated protection devices.
Testing and compliance
Industrial sites have ongoing testing requirements, including test and tag for portable equipment, RCD testing and emergency and exit lighting tests. More on these below.

What’s involved in an industrial electrical installation?
A well-run industrial electrical installation usually follows these steps:
- Site assessment and load calculation. Working out what equipment will run, when, and how much power it needs. This decides cable sizes, protection and whether the existing supply can handle it.
- Design and planning. Laying out switchboards, circuits, cable routes and lighting, and planning around your operations so work causes as little downtime as possible.
- Notifying the network operator. For notifiable work, your electrical contractor lodges a Preliminary Notice with Western Power before starting. Larger jobs may also need a supply upgrade approved by Western Power first, which can take time, so raise it early.
- Installation. Carried out to the Australian wiring rules (AS/NZS 3000) and any equipment-specific standards.
- Testing and commissioning. Every circuit is tested before it’s energised, then equipment is started and checked under load.
- Paperwork. Your contractor lodges a Notice of Completion with Western Power and gives you an Electrical Safety Certificate within 28 days. Keep it with your site records.
Why preventive maintenance matters
On an industrial site, the real cost of an electrical fault is rarely the repair. It’s the downtime. A failed motor starter or tripped main switch can stop a production line, hold up orders and leave staff standing around.
A preventive maintenance program helps you avoid that. It typically includes:
- Scheduled inspections of switchboards, connections, cabling and machinery supply
- Tightening and cleaning of terminations in dusty or high-vibration areas
- RCD testing to confirm safety switches trip when they should
- Emergency and exit light testing
- Test and tag of portable electrical equipment
- Records and reports so you can show what was checked, when, and by whom
Regular maintenance also makes compliance simpler, because the testing and record keeping is already built into your schedule. Learn more about our commercial and industrial maintenance services.
Electrical safety obligations for WA industrial sites
In WA, workplace electrical safety falls under the Work Health and Safety Act 2020 and the Work Health and Safety (General) Regulations 2022. WorkSafe WA’s code of practice for managing electrical risks in the workplace gives practical guidance on meeting them. The key points for industrial businesses are:
Only licensed electricians can do electrical work
Electrical installing work in WA must be done by a licensed electrician working for a licensed electrical contractor. That includes adding circuits, wiring in machinery and changing switchboards. Staff, maintenance crews and machine suppliers can’t do fixed wiring work unless they hold the right licence. Building and Energy has more on notification and certification of electrical work.
Testing electrical equipment
Electrical equipment used in hostile operating environments must be regularly inspected and tested by a competent person. Most factories and workshops count as hostile environments because equipment is exposed to dust, moisture, heat, chemicals or rough handling. AS/NZS 3760 sets the usual test intervals, which are much shorter for workshops and factories than for offices.
RCDs (safety switches)
RCDs protect workers from electric shock and need to be tested regularly to make sure they work. In higher-risk environments, testing is more frequent.
Emergency and exit lighting
Emergency and exit lights are generally tested every six months under AS/NZS 2293.2, with results recorded in a logbook.
Hazardous areas
Sites with flammable gases, vapours or dusts, such as fuel storage, paint booths or grain handling, are classed as hazardous areas. Electrical work in these areas must follow the AS/NZS 60079 series and be done by electricians with specific hazardous area training. If your site has hazardous areas, make sure your contractor holds the right hazardous area competencies.
How to choose an industrial electrical contractor
When you’re comparing industrial electricians, ask about:
- Licensing. An electrical contractor licence from Building and Energy, and licensed electricians on the job.
- Industrial experience. Work on sites like yours and equipment like yours.
- Insurance. Current public liability cover.
- Safety systems. Safe work method statements (SWMS), isolation and lock-out procedures, and site induction.
- Response times. Whether they can attend breakdowns quickly, including after hours.
- Downtime planning. Willingness to work around shifts, shutdowns or weekends.
- Documentation. Clear quotes, test results, certificates and maintenance reports.
Frequently asked questions
What is considered industrial electrical work?
Industrial electrical work is the installation, maintenance and repair of electrical systems on industrial sites such as factories, workshops, warehouses and plants. It usually involves three-phase power, heavy machinery, motor controls and higher loads than homes or offices.
What’s the difference between a commercial and an industrial electrician?
Commercial electricians mainly work in offices, shops and similar buildings. Industrial electricians work with heavy machinery, motor controls, high-capacity switchboards and production equipment, where uptime and specialist safety procedures are critical. Many contractors, including Gen Y Electrical, do both.
How often should an industrial site have electrical maintenance?
It depends on the site, equipment and environment, but most industrial sites benefit from a planned maintenance schedule with inspections at least once a year. Test and tag, RCD testing and emergency lighting tests have their own shorter intervals, often every three to six months in harsh environments.
Do I need an Electrical Safety Certificate for industrial electrical work?
Yes. In WA, your electrical contractor must give you an Electrical Safety Certificate within 28 days of completing electrical installation work, whether it’s at a home, business or industrial site.
Can my maintenance staff do electrical work on our machinery?
Only if they’re licensed electricians. Unlicensed staff can’t carry out electrical installing work, such as wiring in equipment or altering circuits, in WA.
Do you offer after-hours industrial electrical repairs?
Yes. Call 0419 000 164 for breakdowns outside business hours.
Industrial electricians in Rockingham, Mandurah and surrounds
Gen Y Electrical is a licensed electrical contractor (EC15334) with more than 200 five-star Google reviews. We provide industrial electrical services including installations, switchboard upgrades, machinery connections, preventive maintenance and breakdown repairs for factories, workshops and warehouses across Rockingham, Kwinana, Mandurah, Baldivis and surrounding areas. We plan work around your operations to keep downtime to a minimum.

